Laser equipment has various functions for different materials and marking effects. Lansu Laser's laser equipment mainly has three models:

1. Fiber laser marking machine: There are 20w, 30w, 50w, 60w, 100w. The effect of marking is different for different wattages. It is suitable for marking metal and plastic materials, such as stainless steel, aluminum alloy, pvc, etc. It can be used for drawing, peeling paint, and printing black characters.

2. CO2 laser marking machine: There are 30w, 50w, 100w, 200w, which can be used for marking non-metallic materials such as wood, leather, ceramics, etc. The marking effect is better than other equipment, but it cannot be marked with metallic materials.

3, UV laser marking machine: 3w, 5w, 10w, cold light fine marking, a wide range of marking, can mark metal and most non-metallic materials, less power, laser beam is softer.

If you want to choose the right laser marking machine, you must first clarify the production scope, processing materials and processing volume of your own company, and communicate with the laser marking machine manufacturer to determine the appropriate model. Do the following:

1. Marking materials: Different marking materials need to choose the correct laser equipment for marking. For example, the three models introduced above have their own suitable materials for marking. Be sure to choose the right laser marking machine to be successful. Mark the specimen.

2. Marking range: Some laser marking machines need to change the device for different marking ranges, and different models can have different marking ranges when the materials are different. Therefore, it is recommended to first explain the requirements with the laser equipment manufacturer. Marking materials and marking range, the other party can recommend a suitable marking equipment.

3. Marking requirements: Before purchasing a laser marking machine, please indicate whether you need to mark the depth. Choose the appropriate power according to the depth required by the font. The common power is 20 watts, 30 watts, 50 watts, and 100 watts. The greater the power, the greater the power. , The faster the marking speed, for example, the same depth of 20 watts of machines takes 30 seconds, 30 watts takes less than 20 seconds, this depends on the material of the metal.

4. Technological requirements: Some production and processing manufacturers need to add additional marking techniques such as visual positioning, three-dimensional marking, and flying marking. For example, if only typing on plastic products, and the requirements are not high, optical fiber is sufficient. If the requirements are high, after the UV, or if the marking is required to be non-feeling, then a UV laser marking machine is needed.